In the pre-treatment stage the load is heated and humidified to prepare for sterilization.
The load is sterilized with the correct concentration of EO gas at low temperatures.
In the aeration stage, the EO gas residues will be removed from product and packaging.
Sterilization for Medical Protective Mask verification process: 1) Initial contaminating bacteria of measured products. 2) Put in biological indicator and measure sterilization cycle by half cycle method During validation, the biological indicator sh...
Read More
Today, for medical masks, the disinfection and sterilization of disposable civilian masks use ethylene oxide sterilizers. The ethylene oxide sterilizer not only has good sterilization and disinfection effects, but also has a short disinfection and st...
Read More
Sterilization effect Observe the sterilization effect of ethylene oxide sterilizer on the equipment of disinfection supply center under the condition of pure ethylene oxide In the process of sterilization, the sterilization effect was monit...
Read More
Large scale ethylene oxide sterilizer has been approved by many parties Although the large-scale ethylene oxide sterilizer has developed in the market for many years, it has also won the recognition of many users and been widely used by sho...
Read More
Gas sterilization Ethylene oxide, also known as ethylene oxide, is a colorless liquid at low temperature, with aromatic ether flavor, boiling point of 10.8 ℃, olfactory threshold of 760 mg / m-1064mg / m, density of 1.52; ethylene oxide i...
Read More
Sterilization procedure ① The sterilization procedure of ethylene oxide shall include preheating, pre wetting, vacuuming, entering the gasified ethylene oxide to reach the predetermined concentration, maintaining the sterilization time, r...
Read More
ethylene oxide has the following characteristics: 1. Excellent penetration performance: The penetrability of the sterilizer is very important for the sterilization process, especially for the treatment of complex medical devices. The boilin...
Read More
The main features of disinfection equipment are as follows: 1. International security certification Ethylene oxide sterilizer has excellent user safety record in the sales process of nearly half a century in the world 2. Single dose sterili...
Read More
This machine will be an integrated one, touch screen sterilizer with Stainless steel water jacket, and most of the components would be installed before shipment. Seller no need seller go to install on site, but would guide buyer to install by phone o...
Read More
Chemical disinfection and sterilization - ethylene oxide It is a colorless and transparent liquid with the smell of ether. It is a highly effective disinfectant, which can kill bacteria, spores, fungi and viruses. It has strong penetrability, no harm...
Read More
Information about ethylene oxide sterilizer It must be known that there are a lot of germs in the current environment. Officially, because of this, the sterilizer industry is developing and expanding. There are many kinds of sterilizers, among which...
Read More
1. Safety door lock Once the sterilization procedure starts, the chamber of the sterilizer is locked mechanically and electronically. The vacuum state in the process of sterilization and ventilation also makes the chamber door of sterilizer...
Read More